8 inch Steel Wire Brush Cutter Trimmer Head Sets Weeds Blade Cutter Replacement With Adapter Kit
- Steel Brush Cutter Head: The Weed Trimmer Head is made of twisted steel wires with 30 brush blades is specially designed for gardening, helping to protect your trees from harm and efficiently remove all the unwanted and messy weed in your lawn or garden.
- Wide Range of Suitable Applications:8 inches/20cm in large cutting diameter. Bore size: 25.4mm/1 inch. Fit for the most popular straight shaft strimmer.Great for garden, car park, walkways etc. especially grass in corner or brick gap, remove heavy corrosion, rust, paint, spatter and scale removal while also clean weld edges.
- Quick & Stable Weeding:The weed brush with twist knot wire and internal holding plate to ensure stability and safety. For cutting thick grass, tall grass, nettles, thorns, bushes, saplings, etc. Especially grass in corner or brick gap, remove heavy corrosion, rust, paint, spatter and scale removal while also clean weld edges.
- Easy Installation:Simply put the brush cutter head on the top bolt of the shaft trimmer, and then use the washer and nut to fix it which can be used normally. The installation is tight and there is almost no vibration, which ensure 100% safe when using.
Wide Range of Trimmer Brush Head Applications
This trimmer brush head has an inner hole diameter of 1 inch (25.4mm)
which is suitable for most straight shaft gas trimmer with 1
inch(25.4mm) gear case, applied to quickly remove stick weeds,
effectively remove rust, remove moss from slate, clear weeds in corners
and so on. Just need simple installation, it can be assembled and
disassemble quickly, save your energy and time.
|The diameter of central hole is 1 inch, fit most straight shaft trimmers, Such as Stihl FS55, FS56, FS80, FS85, FS 90R, FS100, F108, FS110, FS120, FS130, FS200, FS250, FS-KM. Not fit Stihl FS38/FS40/FS50/FS76/FS311/FS350, Worx, Echo SRM, Ryobi, Homelite, Makita EM2652HLN
How To Install New Trimmer Head
Grass trimmer head is easy to install and remove, simply place the
brush cutter head on the top bolt of the straight shaft trimmer, and
then use the washer and nut to fix it can be used normally.
Here are installation steps of 6 teeth blades adapter kit:
1. install 1 accessory
2. insert fixed wrench
3. install trimmer
4. insall 2 accessory
5. install 3 accessory
6. tighten the screw
The spool on the trimmer can be easily replaced with the combination tool in the grass trimmer blade adapter kit, The installation is tight and there is almost no vibration.