4x137 Wheel Spacers 1 inch 110mm Centerbore 12x1.5 Studs For Can am Maverick x3 Honda Talon Pioneer 1000 2pcs Black

With Max Motosports Wheel Spacers for ATVs and UTVs, you can run the wheels you want. Our 1”, 1.5”, 2”, and 2.5" wheel spacers give your UTVs and ATVs a little extra width, and more width means more stability. We make them tough with 6061 billet aluminum, these wheel spacers atv are safe so that you can trust them to carry you through rough trails. So get installed and ride the way you want.

Description

• Increase clearance: Max Motosports Wheel spacers widen your vehicle wheel base, increasing stability and resistance to side roll-over.
• Improve Vehicle Stability: Added stability provides extra control for experienced riders, and an additional margin of safety for younger or less experienced riders.
• Increase Traction: Aluminum Wheel spacers increase tire to frame clearance allowing installation of wider wheels and high-traction mud,rock or snow tires.
• Easy Bolt-On Installation: Simply bolt the wheel spacer/adapter to your hub, then bolt your wheel to the spacer/adapter. No vehicle modification required.
• 10.9 Grade Hardened Steel Wheel Bolts: Forged, heat-treated and hardened 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.

How To Measure Sizes

Please Make Sure You Take The Proper Measurements Before Purchasing, including Thickness，Bolt Pattern，Thread Pitch and Hub Bore.

CNC Precision Manufactured

10.9 Grade Bolts/Studs and 6061 T6 Forged Aluminum Alloy Disc Body, ensure driving safety and improve your driving experience.

Wider Rims And Tires

• Solve tire rubbing problem wheel spacers
• Increase tire clearance bring aggressive look
• Improve driving experience

Compatibility

Can-Am

Honda

4x137 Wheel Spacers Specifications:

• Quantity: 2pcs or 1 pair
• Thickness: Each Spacer would be 1" Wide
• Color: Black
• Centerbore: 110mm
• Bolt Pattern: 4x137mm
• Thread Pitch: 12mm x 1.5 or 12x1.5 or M12x1.5

How To Choose Correct Wheel Spacers For ATV/UTV?

• Some ATVs require different bolt pattern for front & rear, please check the bolt pattern and studs of your ATV before purchase. If you don't know the specific of your vehicle, please confrim by following the below steps:
• Check Vehicle Bolt Pattern/ PCD : For 4-lug, 6-lug, 8-lug,measure the segment from the center of a bolt hole to the center of another hole; 5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole. Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
• Check Vehicle Hub Bore Size: There are different types of studs, such as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
• Check Vehicle Thread Pitch: Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.