SELECT YOUR VEHICLE
1997-2002 Ford Expedition Front Upper Control Arm Ball Joints Kit 4WD 11pcs

$106.00



  • Unit Type:Control Arm Kit
  • Surface Finish: Polished, Rust Protected
  • Placement on Vehicle:Both LH (Driver Side) or RH (Passenger Side)

Description:

  • Comes as a set of 11
  • Upper Ball Joints Come Pre-Assembled onto the Upper Control Arms
  • Fits 4WD Models Vehicles Only
  • Manufactured to meet or exceed expectations for performance and fit
  • Direct replacements
  • Built to strict quality control standards

Compatibility:

  • 1997-2002 FORD EXPEDITION All 4x4 Models w/ 2.5" Bolt Pattern
  • 1997-2003 Ford F150 All 4x4 Models w/ 2.5" Bolt Pattern
  • 2004 FORD F-150 HERITAGE All 4x4 Models w/ 2.5" Bolt Pattern
  • 1997-1999 FORD F-250 All 4x4 Models w/ 2.5" Bolt Pattern
  • 2002 LINCOLN BLACKWOOD All 4x4 Models w/ 2.5" Bolt Pattern
  • 1998-2002 LINCOLN NAVIGATOR All 4x4 Models w/ 2.5" Bolt Pattern

Package Inculdes:

  • 2x Front Lower Ball Joint - K8695T
  • 1x Front Upper Left Control Arm + Ball Joint - K8722T
  • 1x Front Upper Right Control Arm + Ball Joint - K8724T
  • 2x Front Stabilizer / Sway Bar End Link - K8772
  • 1x Front Left Outer Tie Rod End - ES3366
  • 1x Front Right Outer Tie Rod End - ES3367
  • 1x Front Left Inner Tie Rod End - ES3369
  • 1x Front Right Inner Tie Rod End - ES3370
  • 1x Pitman Arm - K8700

Notes:

  • There are two different versions of idler arm for these vehicles. This kit provides an idler arm with a 2.48" bolt pattern. Please consult with your mechanic to verify which specific bolt pattern you have BEFORE purchasing!
  • 4wd only - will not fit vehicles ,over 8500 gross vehicle weight.